Struct DataPayload

pub struct DataPayload<M: DataMarker>(/* private fields */);

A container for data payloads returned from a data provider.

DataPayload is built on top of the yoke framework, which allows for cheap, zero-copy operations on data via the use of self-references.

The type of the data stored in DataPayload is determined by the DataMarker type parameter.

Accessing the data

To get a reference to the data inside DataPayload, use DataPayload::get(). If you need to store the data for later use, you need to store the DataPayload itself, since get only returns a reference with an ephemeral lifetime.

Mutating the data

To modify the data stored in a DataPayload, use DataPayload::with_mut().

Transforming the data to a different type

To transform a DataPayload to a different type backed by the same data store (cart), use DataPayload::map_project() or one of its sister methods.

Cargo feature: sync

By default, the payload uses non-concurrent reference counting internally, and hence is neither Sync nor Send; if these traits are required, the sync Cargo feature can be enabled.

Examples

Basic usage, using the HelloWorldV1Marker marker:

use icu_provider::hello_world::*;
use icu_provider::prelude::*;
use std::borrow::Cow;

let payload = DataPayload::<HelloWorldV1Marker>::from_owned(HelloWorldV1 {
    message: Cow::Borrowed("Demo"),
});

assert_eq!("Demo", payload.get().message);

Implementations

impl<M> DataPayload<M>

where M: DataMarker,

pub fn from_owned(data: M::Yokeable) -> Self

Convert a fully owned ('static) data struct into a DataPayload.

This constructor creates 'static payloads.

Examples

use icu_provider::hello_world::*;
use icu_provider::prelude::*;
use std::borrow::Cow;

let local_struct = HelloWorldV1 {
    message: Cow::Owned("example".to_owned()),
};

let payload =
    DataPayload::<HelloWorldV1Marker>::from_owned(local_struct.clone());

assert_eq!(payload.get(), &local_struct);

pub fn try_unwrap_owned(self) -> Result<M::Yokeable, DataError>

Convert a DataPayload that was created via DataPayload::from_owned() back into the concrete type used to construct it.

pub fn with_mut<'a, F>(&'a mut self, f: F)

where F: 'static + for<'b> FnOnce(&'b mut <M::Yokeable as Yokeable<'a>>::Output), M::Yokeable: ZeroFrom<'static, M::Yokeable>,

Mutate the data contained in this DataPayload.

For safety, all mutation operations must take place within a helper function that cannot borrow data from the surrounding context.

Examples

Basic usage:

use icu_provider::hello_world::HelloWorldV1Marker;
use icu_provider::prelude::*;

let mut payload =
    DataPayload::<HelloWorldV1Marker>::from_static_str("Hello");

payload.with_mut(|s| s.message.to_mut().push_str(" World"));

assert_eq!("Hello World", payload.get().message);

To transfer data from the context into the data struct, use the move keyword:

use icu_provider::hello_world::HelloWorldV1Marker;
use icu_provider::prelude::*;

let mut payload =
    DataPayload::<HelloWorldV1Marker>::from_static_str("Hello");

let suffix = " World";
payload.with_mut(move |s| s.message.to_mut().push_str(suffix));

assert_eq!("Hello World", payload.get().message);

pub fn get<'a>(&'a self) -> &'a <M::Yokeable as Yokeable<'a>>::Output

Borrows the underlying data.

This function should be used like Deref would normally be used. For more information on why DataPayload cannot implement Deref, see the yoke crate.

Examples

use icu_provider::hello_world::HelloWorldV1Marker;
use icu_provider::prelude::*;

let payload = DataPayload::<HelloWorldV1Marker>::from_static_str("Demo");

assert_eq!("Demo", payload.get().message);

pub fn map_project<M2, F>(self, f: F) -> DataPayload<M2>

where M2: DataMarker, F: for<'a> FnOnce(<M::Yokeable as Yokeable<'a>>::Output, PhantomData<&'a ()>) -> <M2::Yokeable as Yokeable<'a>>::Output, M::Yokeable: ZeroFrom<'static, M::Yokeable>,

Maps DataPayload<M> to DataPayload<M2> by projecting it with Yoke::map_project.

This is accomplished by a function that takes M’s data type and returns M2’s data type. The function takes a second argument which should be ignored. For more details, see Yoke::map_project().

The standard DataPayload::map_project() function moves self and cannot capture any data from its context. Use one of the sister methods if you need these capabilities:

• DataPayload::map_project_cloned() if you don’t have ownership of self
• DataPayload::try_map_project() to bubble up an error
• DataPayload::try_map_project_cloned() to do both of the above

Examples

Map from HelloWorldV1 to a Cow<str> containing just the message:

use icu_provider::hello_world::*;
use icu_provider::prelude::*;
use std::borrow::Cow;

// A custom marker type is required when using `map_project`. The Yokeable should be the
// target type, and the Cart should correspond to the type being transformed.

struct HelloWorldV1MessageMarker;
impl DataMarker for HelloWorldV1MessageMarker {
    type Yokeable = Cow<'static, str>;
}

let p1: DataPayload<HelloWorldV1Marker> = DataPayload::from_owned(HelloWorldV1 {
    message: Cow::Borrowed("Hello World"),
});

assert_eq!("Hello World", p1.get().message);

let p2: DataPayload<HelloWorldV1MessageMarker> = p1.map_project(|obj, _| obj.message);

// Note: at this point, p1 has been moved.
assert_eq!("Hello World", p2.get());

pub fn map_project_cloned<'this, M2, F>(&'this self, f: F) -> DataPayload<M2>

where M2: DataMarker, F: for<'a> FnOnce(&'this <M::Yokeable as Yokeable<'a>>::Output, PhantomData<&'a ()>) -> <M2::Yokeable as Yokeable<'a>>::Output,

Version of DataPayload::map_project() that borrows self instead of moving self.

Examples

Same example as above, but this time, do not move out of p1:

// Same imports and definitions as above

let p1: DataPayload<HelloWorldV1Marker> =
    DataPayload::from_owned(HelloWorldV1 {
        message: Cow::Borrowed("Hello World"),
    });

assert_eq!("Hello World", p1.get().message);

let p2: DataPayload<HelloWorldV1MessageMarker> =
    p1.map_project_cloned(|obj, _| obj.message.clone());

// Note: p1 is still valid.
assert_eq!(p1.get().message, *p2.get());

pub fn try_map_project<M2, F, E>(self, f: F) -> Result<DataPayload<M2>, E>

where M2: DataMarker, F: for<'a> FnOnce(<M::Yokeable as Yokeable<'a>>::Output, PhantomData<&'a ()>) -> Result<<M2::Yokeable as Yokeable<'a>>::Output, E>, M::Yokeable: ZeroFrom<'static, M::Yokeable>,

Version of DataPayload::map_project() that bubbles up an error from f.

Examples

Same example as above, but bubble up an error:

// Same imports and definitions as above

let p1: DataPayload<HelloWorldV1Marker> =
    DataPayload::from_owned(HelloWorldV1 {
        message: Cow::Borrowed("Hello World"),
    });

assert_eq!("Hello World", p1.get().message);

let string_to_append = "Extra";
let p2: DataPayload<HelloWorldV1MessageMarker> =
    p1.try_map_project(|mut obj, _| {
        if obj.message.is_empty() {
            return Err("Example error");
        }
        obj.message.to_mut().push_str(string_to_append);
        Ok(obj.message)
    })?;

assert_eq!("Hello WorldExtra", p2.get());

pub fn try_map_project_cloned<'this, M2, F, E>( &'this self, f: F, ) -> Result<DataPayload<M2>, E>

where M2: DataMarker, F: for<'a> FnOnce(&'this <M::Yokeable as Yokeable<'a>>::Output, PhantomData<&'a ()>) -> Result<<M2::Yokeable as Yokeable<'a>>::Output, E>,

Version of DataPayload::map_project_cloned() that bubbles up an error from f.

Examples

Same example as above, but bubble up an error:

// Same imports and definitions as above

let p1: DataPayload<HelloWorldV1Marker> =
    DataPayload::from_owned(HelloWorldV1 {
        message: Cow::Borrowed("Hello World"),
    });

assert_eq!("Hello World", p1.get().message);

let string_to_append = "Extra";
let p2: DataPayload<HelloWorldV1MessageMarker> = p1
    .try_map_project_cloned(|obj, _| {
        if obj.message.is_empty() {
            return Err("Example error");
        }
        let mut message = obj.message.clone();
        message.to_mut().push_str(string_to_append);
        Ok(message)
    })?;

// Note: p1 is still valid, but the values no longer equal.
assert_ne!(p1.get().message, *p2.get());
assert_eq!("Hello WorldExtra", p2.get());

pub fn cast<M2>(self) -> DataPayload<M2>

where M2: DataMarker<Yokeable = M::Yokeable>,

Convert between two DataMarker types that are compatible with each other with compile-time type checking.

This happens if they both have the same DataMarker::Yokeable type.

Can be used to erase the key of a data payload in cases where multiple keys correspond to the same data struct.

For runtime dynamic casting, use DataPayload::dynamic_cast_mut().

Examples

use icu_provider::hello_world::*;
use icu_provider::prelude::*;

struct CustomHelloWorldV1Marker;
impl DataMarker for CustomHelloWorldV1Marker {
    type Yokeable = HelloWorldV1<'static>;
}

let hello_world: DataPayload<HelloWorldV1Marker> = todo!();
let custom: DataPayload<CustomHelloWorldV1Marker> = hello_world.cast();

pub fn dynamic_cast_mut<M2>( &mut self, ) -> Result<&mut DataPayload<M2>, DataError>

where M2: DataMarker,

Convert a mutable reference of a DataPayload to another mutable reference of the same type with runtime type checking.

Primarily useful to convert from a generic to a concrete marker type.

If the M2 type argument does not match the true marker type, a DataError is returned.

For compile-time static casting, use DataPayload::cast().

Examples

Change the results of a particular request based on key:

use icu_locid::locale;
use icu_provider::hello_world::*;
use icu_provider::prelude::*;

struct MyWrapper<P> {
    inner: P,
}

impl<M, P> DataProvider<M> for MyWrapper<P>
where
    M: KeyedDataMarker,
    P: DataProvider<M>,
{
    #[inline]
    fn load(&self, req: DataRequest) -> Result<DataResponse<M>, DataError> {
        let mut res = self.inner.load(req)?;
        if let Some(ref mut generic_payload) = res.payload {
            let mut cast_result =
                generic_payload.dynamic_cast_mut::<HelloWorldV1Marker>();
            if let Ok(ref mut concrete_payload) = cast_result {
                // Add an emoji to the hello world message
                concrete_payload.with_mut(|data| {
                    data.message.to_mut().insert_str(0, "✨ ");
                });
            }
        }
        Ok(res)
    }
}

let provider = MyWrapper {
    inner: HelloWorldProvider,
};
let formatter =
    HelloWorldFormatter::try_new_unstable(&provider, &locale!("de").into())
        .unwrap();

assert_eq!(formatter.format_to_string(), "✨ Hallo Welt");

impl DataPayload<BufferMarker>

pub fn from_owned_buffer(buffer: Box<[u8]>) -> Self

Converts an owned byte buffer into a DataPayload<BufferMarker>.

pub fn from_yoked_buffer(yoke: Yoke<&'static [u8], Option<Cart>>) -> Self

Converts a yoked byte buffer into a DataPayload<BufferMarker>.

pub fn from_static_buffer(buffer: &'static [u8]) -> Self

Converts a static byte buffer into a DataPayload<BufferMarker>.

impl<M> DataPayload<M>

where M: DataMarker, M::Yokeable: MaybeSendSync,

pub fn wrap_into_any_payload(self) -> AnyPayload

Converts this DataPayload into a type-erased AnyPayload. Unless the payload stores a static reference, this will move it to the heap.

Examples

use icu_provider::hello_world::*;
use icu_provider::prelude::*;
use std::borrow::Cow;

let payload: DataPayload<HelloWorldV1Marker> =
    DataPayload::from_owned(HelloWorldV1 {
        message: Cow::Borrowed("Custom Hello World"),
    });

let any_payload = payload.wrap_into_any_payload();

let payload: DataPayload<HelloWorldV1Marker> =
    any_payload.downcast().expect("TypeId matches");
assert_eq!("Custom Hello World", payload.get().message);

impl DataPayload<AnyMarker>

pub fn downcast<M>(self) -> Result<DataPayload<M>, DataError>

where M: DataMarker, for<'a> YokeTraitHack<<M::Yokeable as Yokeable<'a>>::Output>: Clone, M::Yokeable: ZeroFrom<'static, M::Yokeable> + MaybeSendSync,

Transforms a type-erased DataPayload<AnyMarker> into a concrete DataPayload<M>.

impl DataPayload<HelloWorldV1Marker>

pub fn from_static_str(s: &'static str) -> DataPayload<HelloWorldV1Marker>

Make a DataPayload<HelloWorldV1Marker> from a static string slice.

Trait Implementations

impl<M> Clone for DataPayload<M>

where M: DataMarker, for<'a> YokeTraitHack<<M::Yokeable as Yokeable<'a>>::Output>: Clone,

Cloning a DataPayload is generally a cheap operation. See notes in the Clone impl for Yoke.

Examples

use icu_provider::hello_world::*;
use icu_provider::prelude::*;

let resp1: DataPayload<HelloWorldV1Marker> = todo!();
let resp2 = resp1.clone();

fn clone(&self) -> Self

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl<M> Debug for DataPayload<M>

where M: DataMarker, for<'a> &'a <M::Yokeable as Yokeable<'a>>::Output: Debug,

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl<M> Default for DataPayload<M>

where M: DataMarker, M::Yokeable: Default,

fn default() -> Self

Returns the “default value” for a type.

impl<M> PartialEq for DataPayload<M>

where M: DataMarker, for<'a> YokeTraitHack<<M::Yokeable as Yokeable<'a>>::Output>: PartialEq,

fn eq(&self, other: &Self) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl<M> TryFrom<DataResponse<M>> for DataPayload<M>

where M: DataMarker,

type Error = DataError

The type returned in the event of a conversion error.

fn try_from(response: DataResponse<M>) -> Result<Self, Self::Error>

Performs the conversion.

impl<M> Eq for DataPayload<M>

where M: DataMarker, for<'a> YokeTraitHack<<M::Yokeable as Yokeable<'a>>::Output>: Eq,